How to remove upper bobbin from mini sewing machine

Bobbin threading SOLVED! Lots of people have a problem in machine so this video very useful for people. You will also need to open the bottom plate of your machine and check if anything.

WINDING THE BOBBIN 1. Always remove the bobbin (S) from the bobbin case on the machine before you wind a new bobbin. Place the thread spool (E) on the thread spindle (C) 3.

Put the bobbin pin into the hole on the hand wheel and turn it slightly anti-clockwise. It is also called the balance wheel in the automatic machines. It is this wheel that you use to turn when you want to initially wind some thread to the bobbin to secure it. Why is my Jame sewing machine not picking up the bobbin? How do you replace a bobbin?

How to use mini sewing machine how to unite the upper thread with the bobbin thread how to thread a sewing machine how to use a sewing machine how to thread. Cut the thread and remove the bobbin from the spindle. Adjustment screw (5) can be turned in or out to increase or decrease the amount of thread wound on the bobbin.

This includes removing the bobbin winder screw.

With all these screws out you should be able to remove the side cover. After your cleaning and maintenance are done, reassemble your sewing machine. The bobbin case fits into a bobbin case holder which rotates as the machine operates.

It should be easily remove for example by releasing a pair of clips on a retaining ring. How to use Portable, Cordless and Handy Sewing Machine , Its detailed demonstration with all important parts explanation. Turn off the sewing machine.

If it cannot be remove cut the thread with scissors. Remove the tangled thread. If the threads remain in the bobbin case, remove the needle plate cover, and then remove the threads. You can place a bobbin here instead of using a full-sized spool for the top thread.

To use this secondary bobbin spindle, remove the cap and slide the bobbin onto the post. Check the upper thread. Standard tension setting is 4. Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread.

Make sure that the upper thread is. Before you start sewing again, check your sewing machine needle. Even a slightly bent needle can cause a thread jam.

I had to cut all of the threading off before I could remove the bobbin.

Thanks millions for the tip. Unfortunately, my machine only takes the plastic 15J bobbins. Re-thread the upper part of the sewing machine making sure the thread is passing through every single thread guide on its way to the needle.

Thread the Machine Properly. Your sewing machine manual is the best guide on how to thread your particular sewing machine. Always thread the machine with the presser foot up.

As long as the presser foot. You will simply need to remove foot and footplate on your sewing machine. From there, you should easily be able to pry up the bobbin case using either your fingers, a flathead screwdriver, or both. When using a very smooth, fine bobbin thread the preset tension may not be tight enough to apply adequate pressure on the thread.

You may have heard the term backlash before. Backlash occurs when the machine stops sewing , but the bobbin thread keeps unwinding. Tightening the bobbin tension will fix this.

Are you using the best needle for the job? If the needle has been used to sew more than a few. It looks like the basket has tuned just a bit and the whole machine is stuck.

If you recently bought a mini sewing machine , the first thing you need to do (after reading your manual) is to thread your machine.