Check the power supply first. If not then do so and push the power button again. Next, check the fuses on your sewing machine and to your electrical outlet. There may have been a short and they need to be replaced.
Welcome to my video, hope this video can help you on fixing your sewing machine.
Your mini sewing machine not catching the bobbin thread and not stitching at all? You may have a timing issue. Why is my sewing machine needle not working?
How to diagnose sewing machine problems? How do you extend a mini sewing machine? What is a misaligned needle on sewing machine? Make sure switch is on.
The fun part of sewing is completing our creative inspiration, not fighting the machine. The most frequent issues involve fairly simple problems we have overlooked while absorbed in a project. Here is a simple checklist for mechanical problems, a guideline that can help save you an unnecessary trip to the repair shop and a load of frustration.
But my problem is that it will not sew a straight stitch I have a manual and have done everything that it says to do but it still will not sew a straight line. I would also check the footpedal to make sure it is connecte no telling what wil spook it. You can place a bobbin here instead of using a full-sized spool for the top thread.
To use this secondary bobbin spindle, remove the cap and slide the bobbin onto the post. In the event that the sewing machine won’t stitch, there are several areas of troubleshooting to check before calling an expensive technician. Power supply plug is removed from outlet.
Sewing machine does not start ( not turn on) 1. Main power switch is turned off. Foot control pedal works not correctly. It has power settings L(ow) OFF H(igh). Many machines have a bobbin setting, so you can wind a bobbin quickly on a spindle. When the machine is in the bobbin setting, the needle will not move up and down.
This is a safety feature.
If something is off, it needs to be addressed before you keep going. If not , you run the risk of ruining your project, breaking needles, and damaging your machine. Want more words of wisdom from the expert?
The machine timing gets off if you mistakenly turn the hand wheel away from you instead of toward you, which can cause a misalignment of the belt and gears. Like tuning up an engine, sewing machines can use a good once through. By fixing the timing, you can get your sewing machine back up and running producing quality, even stitches. When I turn my machine on it just starts to sew and will not stop until I turn it off. I have been sewing for years, and this has never happened before.
If you want your sewing machine to last, have it serviced on an annual basis. Wrong bobbin With so many different brands of sewing machines all taking a difference size of bobbin, it is easy to accidentally be using the wrong size. Just because a bobbin is plastic does not mean it will fit your sewing machine. You Don’t Have a Reverse Sewing Option. Some sewing machines cannot sew in reverse.
If you are using a vintage sewing machine , you might not even have a backstitch lever. The location of the backstitch lever is different on every sewing machine. On older machines , the lever is part of your stitch length control.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.